Fenix HP30R V2.0

Description

Designed for serious industrial and outdoor use. It’s big, it’s bold, it’s ultra powerful, controlled by a rotary switch with centre push button and is fuelled by 2 x high capacity 5000mAh Fenix 21700 batteries.

The main beam features 4 brightness levels of 50, 200, 800 and 2000 lumens and a reach of 270m. 2 x 500 lumen Neutral – White pure flood lights deliver 50, 200 and 1000 lumens. Switch them all on to turn night into day with 3000 lumens of light!

With large battery capacity, efficient, light weight aluminium heat sink head, and industrial quality components, HP30R V2.0 can maintain extreme output much longer than a conventional boost mode, whilst effectively dissipating the heat generated and leading to longer service life.

The headlamp is controlled by a large rotary switch. From the central off position, turning the switch clockwise activates the main beam, twist further for increased brightness. Turning the switch counter clockwise activates the flood beam, twist further for increased brightness. Pressing the centre button while the light is on will also activate the non running beam for combined light of up to 3000 lumens.

The heavy duty battery pack features a double locking lid mechanism and contains 2 x 5000mAh batteries, easily exchanged for spares to keep the light shining. These are standard Fenix 21700 batteries rather than a dedicated pack, so spares can be purchased at reasonable cost. The battery case incorporates a 4 x LED meter displaying charging and battery level status, plus a USB- OUT socket for use as a 10,000 mAh power bank.

Main Beam:

The main 2000 lumen LED and reflector provide a balanced combination of far reaching spot beam and area spill light, lighting near and far. Safe illumination for a multitude of tasks.

Low – 50 lumens (120 hours non dimming output) – 42m beam
Med – 200 lumens (34 hours non dimming output) – 78m beam
High – 800 lumens (12 hours non dimming output) – 156m beam
Turbo – 2000 lumens max – 251m beam -10 to15 minutes constant output at 2000 lumens! (output will dim to 1200 lm after 10 minutes to prevent overheating. Turbo output can be re activated once the headlamp cools. Continuous (non stop) run time is 6 hours.

Pure flood beam with no distracting hard edges:

The HP30R V2’s pure flood beam offers 3 output levels from 50 to 1000 lumens. From low level light that lasts for days to a smooth, powerful close in working beam with no hot spot, the flood light has you covered. Run times vary from a long lasting 120 hours working light, to an impressive 10 hours high power floodlight!

Low – 50 lumens (120 hours non dimming output) – 17m beam
Med – 200 lumens (34 hours non dimming output) – 34m beam
High – 1000 lumens (20 minutes approx, then  9 hrs 40 minutes at 800 lumens) – 78m beam

Combined beams:

Both beams running in combination for wide area and distance lighting combined.

Low – 100 lumens (60 hours non dimming output) – 45m beam
Med – 400 lumens (17 hours non dimming output) – 85m beam
High – 1800 lumens (6 hours) – 177m beam
Turbo – 3000 lumens (5 hours) – 270m beam

(All figures taken from Fenix run time graph and may vary dependent on ambient temperature and user selected output variations)

Fenix HP30R V2.0 headlamp features:

• Battery pack extension cable included for pocket or belt use (great to keep the batteries warm in cold weather)
• 4 helmet attachment clips included
• Reflective headband with anti slip silicone strips
• 2m impact resistant
• Overheat step down at 60c
• Weatherproof to IP66 (heavy rain and splashing)

For full product details please refer to the user manual in the images area.